為了有效地解決數據交換時數據表示的通用性問題，使得數據在不同的業務系統間都能夠被識別，本課題采用調查研究和文獻研究相結合的方法，首先對淮北礦業集團各業務系統數據庫中數據表進行統計和分析，重點分析了需要轉換數據的類型和邏輯關系，總結出其所有數據轉換的邏輯關系，然后參考現有文獻資料中提出的數據轉換模型，最后制定出有獨創性的數據源標準和數據映射標準。并采用通用的數據描述語言——XML(eXtensive Makeup Language)將其主要部分表示出來。該數據標準有著數據表示范圍超越數據表、數據轉換的靜態模型和動態模型相結合、數據表示和實體數據庫相分離等特點。通過項目實踐，證明了該標準能夠解決數據表示的通用性問題，能夠?qū)崿F(xiàn)了數據在不同業務系統之間識別與轉換。

　　Abstract:

　　In this paper a portable human-machine interface system based on the STM32 Micro-controller to be used in the compution of Total station measurement is designed. The methods of simulation bus timing by MCU IO port and use SPI interface Flash to storage the font is used. We stored the chinese font in the external SPI interface Flash and load them when we need to use them. The design of chinese font show system based on the latest ARM Cortex-M3 processor was finished. Human-machine interface system which has self definite chinese font is realized.